Release Date：2022-10-22 11:46:50 Popularity：
GST centrifuge tube automatic production line manufacturer for more than ten years specialising in providing medical consumables manufacturers with centrifuge tube production solutions, high quality, guaranteed, affirmed and trusted by the majority of users! Microcentrifuge tubes are small centrifuge tubes, also known as EP (eppendorf) tubes, used in conjunction with microcentrifuges for the separation and centrifugation of micro reagents. The upper diameter of the tube has a round mouth and the lower end of the tube is tapered. The upper bore is rounded to increase the mechanical strength and the lower end is conical to reduce its volume. When a microscopic suspension is centrifuged and precipitated, the volume of the precipitate can be read out directly, and the colour and crystal shape can be observed easily.
The GST centrifuge tube automatic production line is supplied with the option of single bagging, or single screwing of the cap, depending on the customer's requirements. It is compatible with various specifications and has a modular design, which makes it easy and quick to change products of different specifications. The equipment is mainly made of stainless steel 304, aluminium alloy (anodised), non-toxic and non-hazardous polymer materials, etc. Some of them are made of pharmaceutical grade polymer materials and stainless steel 316. The automatic production line can adopt the visual automatic detection function, and the defective products can be removed automatically to achieve fully automatic production;
Suitable for all kinds of centrifugal tubes in the printing machine out of the printing machine, the machine automatically take the material ten cap automatic cap management + eye action hold chapter + eye action sorting + eye action counting + eye action bagging + eye action sealing and other production functions, the machine to use the waterproof line type, centrifugal tubes one by one to arrange, the cap by the vibration plate arrangement, automatic screwing cap, screwing cap strength adjustable, and then positive and negative arrangement into the plastic bag, after a good bag for automatic Sealing, manual only take the whole package of centrifugal tubes boxed, omitted a number of packaging stations, the overall production line equipment in line with the technical requirements of the production of centrifugal tubes.
Microcentrifuge tubes are used in the following ways.
1. as the graduated centrifuge tube is a measuring device, it must be cleaned and dried before use. 2.
2. When reading, be sure to observe the bent liquid level correctly, otherwise a certain error will be introduced.
3. When using, the number of centrifuge tubes should be decided according to the model of centrifuge. If a single test is done with a double-cased centrifuge, the same volume of liquid must be filled in the other centrifuge tube to maintain equilibrium.
4. The centrifuge tube needs to be adapted to the centrifuge. A suitable length and thickness of tube should be used according to the configuration of the centrifuge.
5. After the centrifuge tube has been set into the casing of the centrifuge for stratification and separation, it should be allowed to stop naturally when it stops spinning and should never be forced to stop by external force.
Microcentrifuge tube precautions.
When we use centrifuge tubes, do not use a tube more than once, pay attention to sample volatilisation and the leakage of some radioactive or corrosive samples; in the storage process, it is necessary to seal it well; to prevent deformation of centrifuge tubes in the process of use.
1. Do not place any material on the centrifuge lid, and be sure to clean the inner cavity and the rotor after each use.
2, high-speed microcentrifuge if not used for a long time, the centrifuge cover should be opened for a period of time to dry the inner cavity before use.
