Functions and Precautions of Syringe - Automatic Syringe Assembly Machine

　　GST fully computerised syringe automatic assembly machine manufacturer, the appearance of the syringe is an epoch-making revolution in the field of medical appliances. The process of extracting or injecting gas or liquid with a needle is called injection. The syringe consists of a syringe with a small hole at the front end and a matching piston core rod. When the core rod is pulled out, the liquid or gas is inhaled from the small hole at the front end of the syringe, and the liquid or gas is squeezed out when the core rod is pushed in. .

　　Syringes can also be used in medical equipment, containers, such as some scientific instruments in chromatography to inject through rubber septa. Injecting gas into a blood vessel will cause an air embolism. The way to remove air from the syringe to avoid embolism is to turn the syringe upside down, tap it lightly, and squeeze out a bit of fluid before injecting into the bloodstream.

　　Precautions for use: The syringe is a "single-use" product. Reuse is prohibited and should be destroyed after use. The syringe is sterilized by ethylene oxide and must be used within the expiration date. If the single package is damaged and the sheath falls off, it is prohibited to use and discarded. Syringes should be stored in a ventilated, dry room with a relative humidity of less than 80%. For disposal after normal use, please follow relevant laws and regulations.

　　Instructions for use: tear open the single packaging bag and take out the syringe. Remove the needle protective cover, pull the mandrel to slide back and forth, and tighten the needle. Then the liquid is drawn in, the injection needle is upward, and the core rod is slowly pushed up to remove the air. Subcutaneous or intramuscular injection or blood draw.