How to solve the intractable diseases of the small oral liquid filling machine

　　How to use the correct method to solve the common problems of the equipment in the process of using the small quantitative filling machine is the first problem that modern production enterprises should prepare to overcome after owning the small oral liquid filling machine. The small oral liquid filling machine is mainly for reasonable canned packaging of products with relatively small filling containers and relatively small filling volumes.

　　Therefore, special attention should be paid during use, and don't act rashly when encountering problems, so as not to cause irreparable losses, and even affect the service life of the small oral liquid filling machine. In addition, Guanshentai Technology is willing to provide you with the corresponding solutions to the common problems of small oral liquid filling machines, hoping to bring convenience to your production operations.

　　1. What should I do if the cylinder piston of the small oral liquid filling machine does not move?

　　Confirm whether the safety emergency stop switch of the small filling machine is safe; confirm whether the air source switch of the small filling machine is turned on; confirm whether the one-way signal valve of the small filling machine is damaged.

　　2. What should I do if the cylinder piston of the small oral liquid filling machine does not return after being pushed to the top?

　　For such a phenomenon to occur, it is necessary to confirm whether the moving target of the small oral liquid filling machine is in contact with the one-way valve.

　　3. What should I do if the filling amount of the small oral liquid filling machine is inaccurate or not material?

　　Confirm whether the throttle valve of the small oral liquid filling machine is closed; increase the cylinder pumping speed of the small oral liquid filling machine; confirm whether the tee of the small oral liquid filling machine is locked with a useless clamp; confirm the small filling of the oral liquid Check whether there is enough material in the storage box of the machine; confirm whether the connection of the small oral liquid filling machine is sealed.

　　4. How to deal with the material flowing out of the back end of the material tank from the small oral liquid filling machine?

　　Check whether the sealing ring on the piston of the small filling machine is worn, if it is worn, replace it; confirm whether the piston and the piston rod of the small filling machine are fastened.

　　Want to know more about the matters needing attention in the maintenance of small oral liquid filling machines? Welcome to consult the Guanshentai automation equipment manufacturer.