GST Tip/Reaction Cup Automatic Cartoning Machine-Reaction Cup Detection

　　GST tip/reaction cup automatic cartoning machine equipment manufacturer, the reaction cup is a commonly used vessel on the automatic luminescence analyzer, and its transportation or transmission in the automatic luminescence analyzer requires automation. There are many kinds of cuvettes in the prior art, and there are square ones and round ones in shape. In the method of adding cuvettes, there are automatic stacking cups and manual adding. During the use of the automatic luminescence analyzer, the transfer or transfer of the cuvette usually depends on the transfer device. In addition to transferring or transferring cuvettes in the transfer device in the automatic luminescence analyzer, another important transfer object is the TIP head.

　　Reaction cup detection:

　　1. The reaction cup detector board detects whether the cup in the screw rod is full. If it is full, the chain will stop, otherwise the chain will continuously transport the reaction cup into the center. The way of judging is to judge the harmony or use the instrument program to detect.

　　2. The cuvette detector board detects whether cuvettes enter the reaction section from the preheating section to determine whether to add samples. It should be noted that if such a situation occurs, the preheating section is usually empty. Manually fill 16 cuvettes, otherwise the instrument will alarm.

　　3. The temperature regulator board is used to control the detector to detect whether the temperature of the reaction cups in the left, middle and right sections of the track meets the requirements. When the requirements are not met, the TED control board is instructed to heat the track and keep the reaction track at 37°C , if there is a failure, it will report that the temperature of this section has lost land. The detection method is to exchange the connectors of the left, middle and right danger detectors on the board to see if the alarm position is shifted to judge, or to pull out the detector and insert it into another normal temperature control section, so as to judge.