Relevant safety precautions when operating beverage filling machine

　　Beverage filling machine is a machine for filling beverages. It can fill carbonated beverages, soda water, salt soda and other carbonated beverages. It can also be used to fill non-carbonated beverages such as fruit juice drinks and purified water. Beverage filling machines can be divided into normal pressure filling machines, pressure filling machines and vacuum filling machines according to the filling principle. Although the use of the beverage filling machine is relatively simple, it is also necessary to pay attention to safe production. Below, I will introduce the safety precautions in the operation of the beverage filling machine:

　　Atmospheric pressure filling machine is used to fill liquid under its own gravity. There are two filling methods: timing and constant volume. It is generally suitable for low-viscosity and gas-free liquids, such as milk, wine, purified water, fruit juice drinks, etc.

　　The pressure filling machine is to increase the pressure for filling. One kind of equal pressure filling in which the pressure in the liquid storage tank is equal to the pressure in the bottle depends on the self-flow of the liquid, and the other is that the pressure in the liquid storage tank is higher than that in the bottle. The pressure allows the liquid to be quickly filled for high-speed production and filling in the bottle, which is suitable for the filling of gas-containing liquids, such as beer, soda, champagne, carbonated drinks, soda water, etc.

　　The vacuum filling machine is used for filling when the pressure in the bottle is lower than the atmospheric pressure. It is suitable for liquids of various viscosities, such as oil, syrup, fruit wine, etc.

　　Using a beverage filling machine to fill beverages can greatly improve the filling efficiency, but you need to pay attention to safety when operating the machine. Before use, a trial run is required. By observing whether the running direction of the three-phase motor is correct, whether the pressure of the filling machine is normal, whether the motor and bearings are running normally, whether lubricating oil is required, and at the same time, it is necessary to pay attention to the firmness of each part of the beverage filling machine. Whether the parts are loose.

　　When the beverage filling machine passes the pre-use inspection, it can be used. During use, it is necessary to pay attention to whether the safety equipment functions normally. Before restarting after each shutdown, check whether there is any abnormality in the water tank, chain plate, conveyor belt, storage cover box, etc. At the same time, pay attention to whether the water source, power supply, and air source are connected. The power supply, the power indicator light is on, and the fault indicator light and emergency stop indicator light are not on before you can press the start button on the control box and the start switch at the filling place to start the overall operation of the machine. To stop the machine operation, you need to start the filling process. Press the stop button at the place and the control box, and turn off the main power supply after stopping.