Oil automatic filling machine operation process and precautions

　　Automatic filling machines are mainly a small category of products in packaging machines. From the perspective of packaging materials, they can be divided into liquid filling machines, paste filling machines, powder filling machines, and particle filling machines; from the degree of automation of production It is divided into semi-automatic filling machine and fully automatic filling production line. Recently, with the QS certification of food, edible oil manufacturers have begun to pay attention to product quality and packaging, so the oil filling machine has a prominent position in the filling machine.

　　Filling machine operation method:

　　1. Check before use: After the machine is installed, turn on the power, test run the motor, ensure the correct direction of operation, ensure the pressure and flow of compressed air, check whether the motors, bearings, etc. need to be lubricated, and no oil operation is strictly prohibited, normal After that, the machine can be started, and at the same time, observe whether the fasteners in each part are loose. After the operation of each part is stable, it can be used normally.

　　2. Safety inspection: Check whether the safety facilities are functioning normally.

　　3. Before starting the machine: carefully check whether there is water in all water tanks, whether the chain plates are stuck, whether there are sundries on the conveyor belt, whether there are bottle caps in the lid storage box, whether the water source, power supply, and air source are connected.

　　4. The conditions are ready: after all the conditions are ready, turn on the main power supply, the power indicator light is on, the fault indicator light and the emergency stop indicator light are not on, then the starting conditions are met, press the start button on the control box and fill Start the switch at the place, the whole machine starts to run, enters the automatic working mode of washing, rinsing and filling, press the stop button at the filling place and the control box to stop, and turn off the main power after stopping.

　　Filling machine use safety rules:

　　There is no foreign matter in the filling machine equipment: There is no foreign matter in the filling machine equipment. The filling machine is not allowed to have abnormal noise, if there is any abnormal noise, stop it immediately and check the reason. All protection should be safe and reliable, and it is strictly forbidden to wear clothing that may be caught by moving parts. Do not clean electrical units with water and other liquids. Wear work clothes, gloves, glasses, etc. when cleaning to prevent strong acid and strong alkali corrosion. When the machine is running, someone must monitor it, and do not approach the machine with tools or other objects. Do not allow personnel not involved in the operation to approach the equipment.

　　Precautions for filling machine installation:

　　After unpacking the machine, first check whether the accompanying technical documents are complete, and whether the machine is damaged during transportation, so as to solve it in time. Install and adjust the feed assembly and discharge assembly according to the outline diagram in this manual. Add new lubricating oil to each lubricating point. Use the rocker to turn the machine to check whether the machine is running in the correct direction), and the machine must be grounded.