Operation and maintenance of the automatic filling machine of Guanshentai Technology

　　Guanshentai ycustomised automation equipment manufacturer specialises in the development, manufacture and sales of automatic sampling machines, automatic packaging machines, automatic screen printing machines, automatic assembly machines, automatic filling machines and other automatic production line equipment..

　　A. Automatic filling machine filling accuracy adjustment

　　1. The filling error is mainly determined by the filling volume, filling speed and the opening and closing speed of the upper and lower valves. Up and down the valve switching speed and the viscosity of the product, the greater the viscosity, the slower the valve switching speed.

　　2. The switching speed of the thickening valve is mainly adjusted by the spring pressure of the valve. If the spring pressure increases, the opening and closing speed of the valve is accelerated.

　　3. Adjust the valve spring pressure size should be determined by trial filling measurement and the experience of the operator.

　　Second, the automatic filling machine safety use of automatic filling machine for double-headed liquid filling machine, the work object is liquid, can not be used for other purposes. To ensure production safety, pay attention to the following matters.

　　1. The machine is set up without power supply, the normal gas source is 4-6kg.

　　2. If there is overflow from the filling nozzle, press the safety emergency stop switch to ensure a tidy workshop.

　　3. When dismantling and cleaning this machine, do not rinse the machine body directly with water.

　　4. This machine has a simple circuit and must not be unplugged at will.

　　5. When improper operation causes the cylinder top out can not be returned, please press this button to make it re-set.

　　Three, automatic filling machine equipment maintenance

　　1. The body of the automatic filling machine is a stainless copper shell, please do not use sharp, hard sharp objects to scratch its surface.

　　2. The cylinder has been well lubricated at the factory, please do not open or add any lubricant.

　　3. Before cleaning the piston filling machine, the remaining product inside should be removed and then the drum should be filled with a soft cleaning solution. It is recommended to use warm water. If necessary use soapy water, alcohol or other cleaning solutions.

　　4. Remove the fixing screws on the piston and at the same time when dismantling and cleaning, so as not to affect the process requirements of the other when dismantling the first one.