Now, the piston filling machine occupies an important position in the packaging processing industry, and it is playing an increasingly important role in life. Filling machine is one of the important
Now, the piston filling machine occupies an important position in the packaging processing industry, and it is playing an increasingly important role in life. Filling machine is one of the important equipment for enterprises such as cosmetics, pharmaceuticals, beverages, food, etc. to speed up the efficiency of production, processing and packaging. For enterprises, the use of piston filling machines is not a problem, but it is not necessarily clear about its maintenance and maintenance, so here is a brief overview.
Rinsing, brushing and piston filling machines should:
1. After the installation is completed, commissioning will be carried out, but before commissioning, please prepare the commissioning tools and read the instructions in detail.
2. After the installation and commissioning of bottle rinsing machine, bottle brushing machine and piston filling machine, it is necessary to connect the transmission track, the track and the bottle receiving plate must be as level as possible, and then the material can be put into the storage box , and then make sure that all electrical switches are turned off.
3. In order to prevent potential safety hazards such as electrical leakage from the casing, the power socket must be a three-pin special socket to ensure that the grounding wire is intact. Turn the power switch of the machine to ON, connect the external power supply, and the power indicator light will light up.
Maintenance should be paid attention to after the piston filling machine is used. When it is not working, power off. When the piston filling machine is in maintenance, try to fix the piston when it is removed and washed. At the same time, remove the upper and lower fixing screws, remove and wash Avoid affecting one part when fitting another part. Before starting to clean the piston filling machine, try to clean up the materials remaining in the piston filling machine. After cleaning the material barrel, clean it with a soft cleaning solution. The cylinder has been lubricated before leaving the factory, please do not open or add any lubricating oil to ensure that the surface of the filling machine is clean and hygienic, and power off when it is not working. In addition, while insisting on maintaining and using the filling machine correctly, it is also necessary to carry out regular testing and debugging. Only in this way can the filling machine work healthily and stably.
