How to adjust the filling accuracy of powder granule filling machine

　　The powder granule filling machine is suitable for the quantitative packaging of powdery and powdery materials, such as: flour, milk powder, pesticides, veterinary drugs, dyes, chemical agents, food, additives, enzyme preparations, when we use the powder granule filling machine Occasionally there will be problems with filling accuracy, so how to adjust it?

　　1. Adjustment of filling accuracy of powder granule filling machine

　　The filling error is mainly determined by the filling volume, filling speed, and the switching speed of the upper and lower valves. The switching speed of the upper and lower valves is related to the viscosity of the product, the greater the viscosity, the slower the valve switching speed.

　　Adjusting the spring pressure of the valve should be determined by the test filling measurement and the experience of the operator.

　　Adjusting the switching speed of the valve mainly adjusts the spring pressure of the valve. As the spring pressure increases, the switching speed of the valve increases.

　　2. Safe use of powder granule filling machine The powder granule filling machine is a double-head liquid filling machine, and the working object is liquid, so it cannot be used for other purposes. To ensure production safety, pay attention to the following:

　　This machine is set without power supply, and the normal air source is 4-6kg.

　　Do not wash the body directly with water when disassembling and washing the machine.

　　If the injection nozzle overflows, press the safety emergency stop switch to ensure that the workshop is tidy.

　　The circuit of this machine is simple, and it is not allowed to be plugged in arbitrarily.

　　When improper operation causes the cylinder ejection to fail to return, please press this button to reset it.

　　3. Equipment maintenance of powder granule filling machine

　　Powder granule filling machine The body of this machine is a stainless copper shell, please do not scrape its surface with sharp or hard tools.

　　When disassembling and washing the piston, remove the fixing screws at the same time, so as not to affect the process requirements of the other during disassembly.

　　Before the piston filling machine is cleaned, the remaining product in the tank should be cleaned up, and then the barrel should be filled with mild cleaning solution. Use soapy water, alcohol, or other cleaning fluids if necessary.