Fully automatic beverage filling machinery equipment debugging

　　Beverage filling machinery is mainly a small category of products in packaging machines. From the perspective of packaging materials, it can be divided into liquid filling machines, paste filling machines, powder filling machines, and particle filling machines; from the degree of automation of production It is divided into semi-automatic filling machine and fully automatic filling production line. There are three main categories of filling classification according to the type of packaging: bags, hoses and bottles. The selection of beverage filling machinery is closely related to the packaging. High technical content, high reliability, high speed, high output, and multi-function have become the current development trend of beverage filling machinery.

　　The same beverage filling machinery and equipment can be used for hot filling of tea beverages, coffee beverages, soy milk beverages, fruit juice beverages and other beverages; both glass bottles and polyester bottles can be filled. High speed, high output, the filling speed of carbonated beverage filling machine is as high as 2000 cans/min. The non-carbonated beverage filling machine has 50-100 filling valves, and the filling speed is as high as 1500 fillings/min. High technical content, high reliability, high level of automatic control and high efficiency of the whole line. The online detection device and metering device are complete, which can automatically detect various parameters and measure accurately. High-tech products integrating machinery, electricity, gas, light and magnetism are constantly emerging.

　　Commissioning of sparkling beverage filling machine:

　　1. First loosen the nut of the automatic filling machine and then adjust the screw to change the position of the lower fixing rod accordingly. Thus the push-pull length of the syringe is also changed to achieve the goal of free adjustment of the filling volume. The screw is adjusted clockwise to increase On the contrary, the amount will decrease, and the pointer will indicate.

　　2. Tighten the nut immediately after adjustment, so that the lower fixing rod and the crank are tightly fixed.

　　3. Loosen the nut, and determine the correct position of the upper fixing rod according to the push-pull length of the different syringes. After the lower fixing rod is adjusted, turn the crank to make the syringe turn to the top dead center, and then lift the outer tube of the syringe about 2mm to avoid topping. If the needle tube is rotten, the machine can be turned on after tightening the nut.

　　4. After the carbonated beverage filling machine is installed correctly, turn on the switch. When the machine is working, the crank drives the syringe to pull the pumping speed adjustment knob up and down, select the appropriate filling speed, start normal work, adjust the governor knob, and divide clockwise. The loading speed is fast, otherwise the speed is slow.